JVC VN-C30U - Manual (Page 11)

11
VN-C30U Configuration page
[Other Settings]
Click on <Apply> to update the settings.
CAUTION
The confirmation window above is displayed after [IP Address], [Subnet
Mask], [Host Name] and/or [HTTP Port] have been changed.
When <OK> in this window is clicked, the VN-C30U unit is reset internally
to update the IP address, etc. As this renders the IP address before change
(factory-set value) ineffective, the connection to the VN-C30U is
disconnected. The screen indicates that a connection cannot be
established after the web browser has not been used for a while. This is a
result of the change in the IP address. (The same is also true when the
Port Number is changed.)
Confirm the changed IP address again. Click on <OK>
if the entry is correct.
03.10.17, 11:19 AM Page 11