JVC VN-C30U - Manual (Page 16)

16
Control windows
[Pan/Tilt/Zoom] control window
The sub-window shown below can be used for the control of panning, tilting,
zooming and position movement.
The VN-C30U unit incorporates a position memory storing up to 10 pan/tilt
positions used in image capturing. Clicking one of the 10 (No.) buttons enables
the camera to start the pan/tilt operation to the corresponding position stored
in the memory. When the mouse pointer is placed over the Move Position
button, the Pan/Tilt/Zoom location of each position will be displayed in Alt.
The pan/tilt position can be changed using these 8 pan/tilt control buttons.
The amount of movement per press of a pan/tilt button is the “Angle Step”.
The current [Zoom Step] and [Angle
Step] settings for the pan/tilt operation
are displayed.
Either setting can be changed by
entering the desired angle value
(integer) and clicking on the <Apply>
button. The lens zooming can be changed
using these two buttons. The amount
of lens movement per press of the
button is the “Zoom Step”.
CAUTION
Do not execute the pan/tilt operation until the web browser has completed
loading the images of all the buttons.
03.10.17, 11:19 AM Page 16