JVC SR- DVM600U - Manual (Page 59)

Masterpage:Right+
EN
59
Filename [DVM600US_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 59Monday, 25 September 2006 13:54
DISC PLAY SET UP
8
RESUME ^ OFF / ON / DISC RESUME
When this function is set to AONB or ADISC RESUMEB, you can
use the resume function. ( A pg. 24)
OFF :
You cannot use the resume function.
ON :
You can start playback from the resume point of the placed disc.
DISC RESUME :
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected.
NOTE:
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalized DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under
AONB setting will be applied even
if ARESUMEB is set to ADISC RESUMEB.
HDD SET UP
8
LIVE MEMORY ^ OFF / 30 MIN / 1 HR / 3 HR
When this function is set to A30 MINB, A1 HRB or A3 HRB, you can
apply the selected time length to ATemporary recording for Live
Memory (HDD deck only) B (A pg. 37).
DVD SET UP
8
SAVE AS LIBRARY ^ OFF / ON
When this function is set to AONB, the recording information is
automatically stored in the library. For details, refer to ANavigate
Library Information B (A pg. 43).
8
CONTINUOUS PLAY ^ OFF / ON
When this function is set to AONB, multiple titles on a disc are
played back continuously one after another.
8
VIDEO MODE RECORDING ASPECT ^ PRIORITIZE 4:3 /
PRIORITIZE 16:9
This is the setting for the aspect ratio used when you dub titles to
DVD discs in video mode. If the titles you want to dub are recorded
in both 16:9 and 4:3, you must select one aspect ratio.
PRIORITIZE 4:3 :
If you select APRIORITIZE 4:3B, even a title recorded in 16:9 is
dubbed in 4:3.
PRIORITIZE 16:9 :
If you select APRIORITIZE 16:9B, even a title recorded in 4:3 is
dubbed in 16:9.
8
MP3&WMA / JPEG ^ MP3&WMA / JPEG
You can select files to play back, when both MP3&WMA files and
JPEG files are recorded on a disc.
MP3&WMA :
Select this to play back MP3/WMA files.
JPEG :
Select this to play back JPEG files.
COMMON SET UP
8
DV AUTO CHAPTERING ^ OFF / ON
When this function is set to AONB, you can create chapters (marks)
when dubbing from the DV deck or via the DV input terminal
connecting the external DV camcorder.
OFF:
Do not create chapters (marks).
ON :
Create chapters (marks).
NOTE:
Marks cannot be created for direct recording to the DVD in Video
mode. Record to the HDD, then dub to the DVD.
8
MOTION INDEX ^ OFF / ON
When this function is set to AONB, you can set the picture on the
top left corner of the Library Database Navigation screen or the
Editing screen to that of the selected title.
REC/PLAY SET UP
8
XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to
ALINEAR PCMB, you can obtain
a high-quality audio sound.
DOLBY DIGITAL :
To record in Dolby Digital format.
LINEAR PCM:
To record in Linear PCM format.
8
JUMP TIME ^ 15 MIN / 30 MIN / 1 HR
You can locate a scene ahead of or behind the currently viewed
one by jumping a selected time interval during playback (or Live
Memory Playback). For details, refer to
AJump SearchB (A pg. 24,
32).
DISPLAY SET
8
SUPERIMPOSE ^ OFF / ON / AUTO
When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (
A pg. 20)
OFF:
To turn off superimposed indications.
ON:
To turn on superimposed indications.
AUTO :
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
NOTES:
● When you use this unit as the source player for editing, be sure to
set
ASUPERIMPOSEB to AOFFB before starting. (A pg. 52)
● When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
DIMMER (DURING POWER ON) ^ BRIGHT / DIMMED
You can change the brightness of the front display panel.
BRIGHT :
Normally select this.
DIMMED :
To dim the front display panel.
8
DIMMER (DURING POWER OFF) ^ OFF / ON
You can select to light up or turn off the light of the front display
panel when the unit is off.
OFF:
To turn off the light of the front display panel when the unit is off.
ON :
To light up the front display panel when the unit is off.
8
QUICK STARTUP ^ OFF / ON
When this function is set to AONB, operations such as playback can
be performed more quickly upon turning on the unit than when set
to
AOFFB. However, the power consumption during standby
increases.
OFF :
To disable the quick startup function.
ON:
Operations can be performed quickly after turning on the unit.
8
ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to
AOn-screen Language SetB (A pg. 20).
DVM600US_00.book Page 59 Monday, September 25, 2006 1:54 PM