JVC KW-XC828 - Manual (Page 10)

10
ENGLISH
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see page 9.
1
Select the band (FM1, FM2, FM3, or
AM) you want.
2
Select the number (1 – 6) for the
preset station you want.
FM1 FM2 FM3 AM
To tune in the favorite station (EX)
Press EX so that the unit
automatically turns on (if it has
been off).
Your favorite station is tuned in.
• If you press the button again, the previous
source will be played back again.
EX
EX
“EX” flashes on the display.
Storing your favorite station into the
EX (extra) button
You can preset an FM or AM station (such as
your favorite station or traffic announcement
station); and recall it by one touch operation even
if the unit is turned off.
EXAMPLE: Storing an FM station of 88.3 MHz
into the EX button
1
Select the FM1 band.
2
Tune in to a station (in this example,
of 88.3 MHz).
3
Press and hold the EX button until
“EX” flashes.
Notes:
• A previously preset station is erased when a new
station is stored.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
Press ¢ to tune in
to stations of higher
frequencies.
Press 4 to tune in
to stations of lower
frequencies.
EN08-11KW-XC828[U] 02.1.30, 5:33 PM 10