JVC KW-XC828 - Manual (Page 35)

ENGLISH
35
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X
series with your unit.
If you have another CD automatic changer,
consult your JVC car audio dealer for
connections.
• For example, if your CD automatic changer is one
of the KD-MK series, you need a cord (KS-U15K)
for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with
your CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, “NO DISC” will appear on the display. If
this happens, remove the magazine and set
the discs correctly.
• If “RESET 1 – RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the
connection, connect the connecting cord(s)
firmly if necessary, then press the reset button
of the CD changer.
Playing CDs
Select the CD automatic changer (CD-CH).
Playback starts from the first
track of the first disc.
All tracks of all discs are played
back.
Elapsed playing time Track number
EX
DIRECTORY
Note on One-Touch Operation:
When you press CD/CH, the power automatically
comes on. You do not have to press
ATT / to turn
on the power.
Note:
If you play a CD with assigned name (see page 33),
the assigned name appear on the display, followed by
the track number and elapsed playing time.
Assigned name*
Disc no. and
Current track no.
Current track no.
and Elapsed playing time
To change the display information
While playing back a CD, you can
change the information shown on
the display.
Each time you press DISP
(display), the display changes to
show the following:
* If no name is assigned, “NO NAME” will appear.
EN35-37KW-XC828[U] 02.1.30, 5:34 PM 35