JVC HR-J633U - Manual (Page 17)

17
Manual Tracking
Once playback begins, the VCR’s automatic tracking function is
engaged. If noise appears in the picture, you can override this
and make the adjustment manually.
ENGAGE MANUAL
TRACKING MODE
1
During playback, press the CH 5∞ buttons on the
VCR's front panel simultaneously to cancel the
automatic tracking mode and enable manual tracking
adjust.
ADJUST MANUAL
TRACKING
2
Press CH 5∞ on the VCR's front panel or remote. Press
lightly for fine adjust, or press and hold for coarse
adjust. Watch the screen and continue adjusting until
optimum picture and sound quality are achieved.
RE-ENGAGE AUTOMATIC
TRACKING
3
Press the CH 5∞ buttons on the VCR's front panel
simultaneously.
● When automatic tracking is re-engaged, video
calibration is automatically activated.
NOTE:
During slow-motion playback, simply press CH 5 or ∞ on the
VCR's front panel or remote to adjust tracking.
1 2
4 5
3
6
8
0
7 9
2 2
q 5 / 8 6
CH
CH