Instant timer recording (itr), On-screen timer programming, Start recording – JVC HR-J633U User Manual

Page 29: Engage itr mode, Set recording duration, Load a cassette, Access program set screen, Timer recording

Advertising
background image

29

Instant Timer

Recording

(ITR)

This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the VCR off after
recording is finished.

START RECORDING

1

Press REC.

ENGAGE ITR MODE

2

Press REC again. ITR blinks and 0:30 appears on the
front display panel.

SET RECORDING

DURATION

3

If you want to record for more than 30 minutes, press
REC to extend the time. Each press extends recording
time by 30 minutes.

NOTES:

●

You can only perform ITR using the REC button on the VCR's
front panel.

●

After you set the time, the previous display reappears.

●

To check remaining recording time, press REC once during
recording and the remaining time is displayed for about 5
seconds. Be careful not to press again during this 5 seconds,
or you’ll add 30 more minutes to the recording.

LOAD A CASSETTE

1

Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load.

● The VCR comes on, and the counter is reset,

automatically.

ACCESS PROGRAM SET

SCREEN

2

Press MENU, then press
OK.

You can directly program the VCR’s timer to record up to 8
shows, as far as a year in advance. Remember, the clock must
be set before you can program the timer (

੬

pg. 7).

PROGRAM 1

DATE - - / - -
START - - : - - AM
STOP - - : - - AM
CHANNEL - - SP

PRESS NUMBER KEY(0-9)

OR (

5,∞), THEN (OK)

PRESS (MENU) TO END

On-Screen

Timer

Programming

* Refer to the illustration on page 30.

TIMER RECORDING

CONTINUED ON NEXT PAGE.

2

2

q

5

/

8

6

REC

I T R

VIDEO

SP

R E C

Advertising