Jwin JT-P570 - Manual (Page 8)

12/30/20039:53 AM Page8
STORING PHONE NUMBERS IN ONE-TOUCH DIAL MEMORY (M1/M2/M3)
You can store up to 3 phone numbers in one-touch memory. These numbers are
assigned to the M1, M2, and M3 buttons. Reserve these buttons for your most
frequently used phone numbers.
1. Lift the handset or press the
SPEAKER button.
2. Press the STORE button.
3. Enter the number you want to store.
4. Press M1, M2 or M3.
5. Replace the handset or press the
SPEAKER
button.
STORING PHONE NUMBERS IN TWO-TOUCH MEMORY (Autodial)
1. Lift the handset or press the
SPEAKER button.
2. Press the
STORE
button.
3. Enter the number you want to store
4. Press the
STORE button.
5. Press a number from 1 to 10 (to assign storage of the phone number). You can list
these numbers in the index space provided on the console.
6. Replace the handset or press the
SPEAKER
button.
DIALING A NUMBER FROM 3-ONE TOUCH (M1/M2/M3) MEMORIES
Get dial tone (by picking up handset or pressing the
SPEAKER button) and press one of
the 3 buttons marked with the symbols (M1/M2/M3)
DIALING A NUMBER FROM AUTODIAL MEMORY
1. Lift the handset or press the
SPEAKER button.
2. Press AUTO.
3. Press the numerical button assigned to the number you wish to dial. The unit will dial
the number stored in memory.