Getting started, Power, Charging the battery pack 1 – JVC GR-DV801 User Manual

Page 10: Using the battery pack

Advertising
background image

Master Page: Left-start

10

EN

GETTING ST

AR
T

E

D

This camcorder’s 2-way power supply system lets
you choose the most appropriate source of power.
Do not use provided power supply units with other
equipment.

Charging The Battery Pack

1

With the arrow on the battery pack pointing
upward, push the battery pack slightly against the
battery pack mount

a.

2

Slide up the battery pack until it locks in place

b.

3

Set the Power Switch to “OFF” while pressing
down the Lock Button located on the switch.

4

Connect the AC Adapter to the camcorder

c.

5

Plug the AC Adapter into an AC outlet

d.

6

The power/charge lamp on the camcorder blinks
to indicate charging has started.

7

When the power/charge lamp goes out, charging
is finished.

8

Unplug the AC Adapter from the AC outlet.

9

Disconnect the AC Adapter from the camcorder.

To detach the battery pack...
Slide the battery pack down slightly while sliding
BATT. RELEASE to detach it.

NOTES:

● If the protective cap is attached to the battery

pack, remove it first.

● During charging, the camcorder cannot be

operated.

● Charging is not possible if the wrong type of

battery is used.

● When charging the battery pack for the first time

or after a long storage period, the power/charge
lamp may not light. In this case, remove the
battery pack from the AC Adapter, then try
charging again.

● If the battery operation time remains extremely

short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.

● Using the optional AA-V40 AC Power Adapter/

Charger, you can charge the BN-V408U/V416U/
V428U battery pack without the camcorder.
However, it cannot be used as an AC Adapter.

● For other notes, ੬ pg. 68.

Using The Battery Pack

Perform steps 1 and 2 in “Charging The Battery
Pack” in the left column.

Maximum continuous recording time

* Provided

NOTES:

● Recording time is reduced significantly under the

following conditions:
• Zoom or Record-Standby mode is engaged

repeatedly.

• The LCD monitor is used repeatedly.
• The playback mode is engaged repeatedly.

● Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the
planned shooting time.

Power

BATT.RELEASE Switch

To AC outlet
d

Open the cover.

AC Adapter

Power Switch

Power/Charge Lamp

Lock Button

To DC connector

c

Arrow

Battery pack

Charging time

BN-V408U

Approx. 1 hr. 30 min.

BN-V416U
(optional)

Approx. 2 hr.

BN-V428U
(optional)

Approx. 3 hr. 20 min.

Battery pack LCD monitor on Viewfinder on

BN-V408U*

1 hr. 10 min.

1 hr. 30 min.

BN-V416U

2 hr. 20 min.

3 hr.

BN-V428U

4 hr.

5 hr. 10 min.

BN-V840U

5 hr. 30 min.

7 hr. 15 min.

BN-V856U

7 hr. 40 min.

10 hr. 20 min.

GR-DV801US.book Page 10 Wednesday, January 22, 2003 5:39 PM

Advertising