JVC GR-DV801 - Manual (Page 48)

48
EN
Master Page: Left
The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.
To make thumbnail images during video
recording automatically
1
Load a cassette. ( ੬ pg. 15)
2
Load a memory card. ( ੬ pg. 16)
3
Set the VIDEO/MEMORY Switch to “VIDEO”.
4
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
5
Set “NAVIGATION” to the desired navigation
storing time. (
੬ pg. 31, 35)
● If the “ ” indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory
card is loaded.
6
Press the Recording Start/Stop Button to start
recording.
● When the recording time
is over the navigation
time set in step 5, “
”
appears briefly, then the
image of the point where
recording is started is
captured and stored in
the memory card as a
thumbnail image.
● If the Recording Start/
Stop button is pressed
before “
” stops
blinking, the image of the
point where the loaded memory card is
recognised is captured.
7
Press the Recording Start/Stop Button to stop
recording.
To make thumbnail images after video recording
manually...
1) Perform steps 1 to 4 above.
2) Set “NAVIGATION” to “MANUAL”.
( ੬ pg. 31, 35)
3) After the recording, press NAVI STORE.
•The “ ” indicator appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
NOTES:
● The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “
/ ”
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
● If “5S” is set to “5S” or “Anim.” in MANUAL
Menu, the NAVIGATION function will not work
properly.
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1
Load a cassette. ( ੬ pg. 15)
2
Load a memory card. ( ੬ pg. 16)
3
Set the VIDEO/MEMORY switch to “VIDEO”.
4
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
5
Press NAVI during video playback or stop mode.
● The loaded cassette’s
NAVIGATION thumbnail
image screen appears.
● Press 3 to display the
previous page. Press 5
to display the next page.
6
Rotate the MENU Wheel to select the desired
image, and press it.
NAVIGATION Function
Power Switch
MENU Wheel
VIDEO/MEMORY
Switch
Lock Button
NAVI STORE Button
NAVI Button
Fast-Forward Button (5)
Rewind Button (3)
PAUSE PAUSE PAUSE
1h m 1h m 1 0 0
Displayed while the
captured image is
being stored in the
memory card.
TC : 1 3 : 2 3 : 1 5
3 2 2 4 Y DATE : A M : ’ 3 0 : 3 2 9 AM
ON I T NAV I GA
1 2 3
4 5 0 06
FEATURES FOR RECORDING (cont.)
GR-DV801US.book Page 48 Wednesday, January 22, 2003 5:39 PM