JVC 1208YDR-YG-MD - Manual (Page 5)

ENGLISH

Date/Time Setting
Q
Open the LCD monitor to
turn on the camcorder
R
Select [YES] within
10 seconds
T
Power Button
S
Select [CLOCK SETTING]
•
When the message disappears, press the
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
•
Touch the sensors with your finger. The
sensors do not function if you touch them
with your finger nail or with gloves on.
Select the city closest to
the area where you use
the camcorder
U
Select [ON] if daylight
saving time is effective.
LCD monitor
SET
SET DATE/TIME!
YES
NO
Slide your finger up and down on
the sensor. Then touch OK
.
SET QUIT
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
SET THE CITY, DATE AND TIME
CLOCK ADJUST
AREA SETTING
SET QUIT
NOV.1.2009 04:55PM
SET QUIT
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
SET DAYLIGHT SAVING TIME
NOV. 1. 2009 04.55PM
OFF
V
Set the date and time
CLOCK SETTING
DATE TIME
GMT+ 9:00
NOV 1 2009 4 55 PM
SAVE QUIT
Touch sensor: Sets the date and time
}: Moves the cursor to the right
OK: Clock starts