JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A - Manual (Page 4)

4
EN
Master Page: Left
_001EN_PDF_02M3D7S-PhotoNaviTOC.fm Page 4
● You can find the latest information (in English) on the provided software program at our world wide web
server at http://www.jvc-victor.co.jp/english/index-e.html
● Microsoft ® and Windows ® are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
● Macintosh is a registered trademark of Apple Computer, Inc.
● Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
CAUTION:
● Operate this equipment according to the operating procedures described in this manual.
● Use only the provided CD-ROM. Never use any other CD-ROM to run this software.
● Do not attempt to modify this software.
● Changes or modifications not approved by JVC could void user’s authority to operate the equipment.
ATTENTION:
When connecting a USB cable or a DV cable to PC …
● Never switch the VIDEO/MEMORY (DSC) mode on the camcorder when the USB cable is connected. It
may cause the camcorder not to be recognized by the PC. If it occurs, confirm that the PC is not
accessing the camcorder, then disconnect the USB cable and connect it again.
● Never turn on or off the camcorder when the USB or DV cable is connected. It may cause malfunctions
of the PC.
How to handle a CD-ROM
● Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything
or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft
cloth outward from the center hole using a circular motion.
● Do not use conventional disc cleaners or cleaning spray.
● Do not bend the CD-ROM or touch its mirror surface.
● Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight.