JVC 1005TNH-II-IM - Manual (Page 24)

24
Quick Setup Connections
This TV can be used as a computer screen. Use a commercially available D-SUB cable to
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you
want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-3 audio input terminal to the computer's audio output terminal.
Connecting to the computer
TV Rear Panel
INPUT
3
Y
Pr
Pb
VIDEO
R - AUDIO
- L
PC IN
(D-SUB)
S-VIDEO
Notes:
• Refer to your computer manual for a detailed explanation of the connections concerning your
computer.
• Make sure that the connectors are facing the correct way when connecting.
• After connecting, tighten the two screws to fix the connectors in place.
Looking at the images from a computer
After starting the computer, press the INPUT button to choose INPUT-3. You can listen to the
sound when the sound from the computer is connected to the INPUT-3 AUDIO input terminal.
Notes:
• When the sound from the computer is connected to INPUT-3 by choosing external input
INPUT-3, the sound from the computer can be listened to, but the images from the computer
cannot be seen.
LCT1976 A.indd 24 LCT1976 A.indd 24 10/6/05 1:47:51 PM 10/6/05 1:47:51 PM