JVC 1005TNH-II-IM - Manual (Page 62)

62
Button Functions
Turns the TV on or off.
Press the P OWER button
Note:
• When you press the power button on the TV, and you are tuned to a digital channel or i.Link,
"NOW WARMING UP... PLEASE WAIT" appears on the screen. It takes a little while to warm
up.
Power
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: VIDEO-1, 2, 3, DIGITAL-IN or i.LINK for
video devices like VCRs, DVD players or camcorders.
Press the I NPUT button
By every press of the I NPUT button, you can change the input mode.
Notes:
• When you return to TV mode, press the R ETURN +/TV button or direct 10 key pad or C HANNEL
+/– button.
• You can also access by pressing the I NPUT button on the side of the TV instead of the remote
control.
• i.LINK can be selected only when you have an i.LINK device connected.
• If you have a PC connected to the TV, select VIDEO-3.
Input
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the T UNE button
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the T HEATER P RO button
TheaterPro D6500K
LCT1976 A.indd 62 LCT1976 A.indd 62 10/6/05 1:48:06 PM 10/6/05 1:48:06 PM