Setting menu (continued) – JVC DLA-HD100 User Manual

Page 28

Advertising
background image

4

28

Setting Menu (Continued)

Settings

z

The display position value varies with the input signal.

z

This adjustment is available for analog input signals, or for COMPONENT and HDMI-1/2 input signals when “V-Stretch” is set to
“On”.

z

This setting is available only when projecting the HDMI input.

z

Masking is available only when high definition images are input.

z

This setting is not available when PC signals are input to HDMI terminal.

z

This setting is available only when projecting the component video input.

z

This setting is available only when projecting the HDMI input.

Setup > Picture Position

M

Picture Position

Adjusts the horizontal/vertical position of the projected image.

Setup > HDMI Input Level

N

HDMI Input Level

Configures the input level setting of the HDMI input terminal.

Standard

For normal circumstances, select this setting.

Enhanced

Select this setting when the black-and-white of the projected image is unclear when
RGB video signals are input from DVI devices.

Setup > Mask

O

Mask

Masks (Hides) the outer area of the projected image.

2.5%

Masks 2.5 % of the screen.

5%

Masks 5 % of the screen.

Off

No masking.

Setup > Overscan

P

Overscan

Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).

Off

No overscan.

On

Overscans the top, left, bottom and right at 2.5 % each.

Source > COMP

Q

COMP

Configures the input signals of the component video input terminals.

Y Pb/Cb Pr/Cr

Select this when component video signals are input.

RGB

Select this when RGB video signals are input.

SCART

Select this when RGB video signals and sync signals are input from SCART plug for
European market.

Source > HDMI

R

HDMI

Configures the input signals of the HDMI input terminal.

Auto

Automatically configures input signals.

YCbCr(4:4:4)

Select this when Y Cb Cr (4:4:4) video signals are input.

YCbCr(4:2:2)

Select this when Y Cb Cr (4:2:2) video signals are input.

RGB

Select this when RGB video signals are input.

DLA-HD100U_EN.book Page 28 Friday, October 12, 2007 5:14 PM

Advertising