JVC LCT1616-001A - Manual (Page 21)

20
Video Adjustments
(Continued)
To make an adjustment while viewing the adjustment
bars
After step 3 on page 19, proceed as follows:
1 Press 5/∞ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for R GAIN appears on the screen.
3 Press 5/∞ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 19, proceed as follows:
1 Press 5/∞ to move the cursor (3) to “reset.”
2 Press 3.
The confirmation screen appears.
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
: 0 0 0 R G A I N
+ –
A r e y o u s u r e ?
" Y E S "
t h e n k e y .
" N O " t h e n k e y . M E N U
r e s e t
R GAIN G GAIN
B GAIN
2 / 3
5 / 5
VIDEO
DISPLAY
OFF POWER
RM–C579 REMOTE CONTROL UNIT
ON
ASPECT
MUTING
MENU/EXIT
VOLUME
A
COMPO.
/(RGB B)
B RGB A
INPUT SELECT
MENU/EXIT
* 1
“ASPECT” does not appear when 720/60p,
1080/60i (1035/60i), or 1080/50i signal is being
input through the COMPONENT/RGB B input
terminals.
* 2
“SIGNAL MODE” appears only when VIDEO A,
VIDEO B, or COMPONENT input is selected.
* 3 “RGB/COMPO.” appears only when the RGB B
or COMPONENT input is selected.
* 4 “SYNC TERM.” appears only when the RGB B
input is selected.
MENU INPUT
MENU INPUT
MENU 2 / 3
5
5 /
EN_14_23_GM_V42C.p65 04.1.14, 1:22 PM 20