JVC LCT1616-001A User Manual
Page 36
35
PICTURE ADJ. (Picture adjustment): See page 16.
CONTRAST
Adjusts the contrast of the picture.
BRIGHT
Adjusts the brightness of the picture.
CHROMA*
1
Adjusts the color density of the picture.
PHASE*
2
Adjusts the color phase.
SHARPNESS
Adjusts the outlines of the picture.
sub menu
Displays the fine adjustment bar.
reset
Resets the Picture Adjustment Menu settings to defaults.
SIZE/POSITION ADJ. : See page 17.
H SIZE
Adjusts the horizontal screen size.
H POSITION
Adjusts the horizontal screen position.
V SIZE
Adjusts the vertical screen size.
V POSITION
Adjusts the vertical screen position.
DOT CLOCK*
3
Adjusts to eliminate stripes or flickering. Use with “CLOCK PHASE.”
Normally, no adjustment is needed.
CLOCK PHASE*
3
Adjusts to eliminate stripes or flickering. Use with “DOT CLOCK.”
Normally, no adjustment is needed.
sub menu
Displays the fine adjustment bar.
reset
Resets Size/position Adjustment Menu settings to defaults.
FUNCTION SELECT: See pages 19 to 23.
COLOR TEMP.
Adjusts the color temperature.
Use when the picture is reddish or bluish.
ASPECT*
4
Selects the horizontal to vertical ratio of the screen.
SIGNAL MODE*
5
• Selects a color system (NTSC, PAL, SECAM, NTSC 4.43, PAL60) when VIDEO A or VIDEO B
input is selected. Normally, set to “AUTO.”
• Selects a scan system—480i, 576i, 480p, 576p, 720p, 1080/60i (1035i), 1080/50i—when
COMPONENT input is selected. Normally, set to “AUTO.”
RGB/COMPO.*
6
Selects the usage of the COMPONENT/RGB B terminals either as the COMPONENT input
terminal or as the RGB B input terminal.
SYNC TERM.*
7
Adjusts the resistance of RGB B input terminals.
reset
Resets the Function Selection Menu settings to defaults.
STATUS DISPLAY: See page 24.
Shows the input mode and signal type on the screen.
*
1
Adjustable when viewing the NTSC, PAL or SECAM signal, or component signal.
*
2
Adjustable when viewing the NTSC signal or component signal.
*
3
Adjustable when RGB A or RGB B input is selected.
*
4
Not adjustable when viewing the following component signals—720/60p, 1080/60i (1035/60i), and 1080/50i. ( In such a case,
“ASPECT” does not appear on the display.)
*
5
Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.
*
6
Adjustable when RGB B or COMPONENT input is selected.
*
7
Adjustable when RGB B input is selected.
EN_34_42_GM_V42C.p65
04.1.14, 1:22 PM
35