John Deere ET-3403-J - Manual (Page 16)

16 10-Inch Compound Miter Saw Operator's Manual
OPERATION:
WARNING: TO AVOID PERSONAL INJURY, NEVER REMOVE OR PLACE A WORKPIECE ON
THE TABLE WHILE THE TOOL IS BEING OPERATED. NEVER PLACE YOUR
LIMBS INSIDE OF THE LINE NEXT TO WARNING SIGN WHILE THE TOOL IS BEING
OPERATED. THIS MAY CAUSE HAZARDOUS CONDITIONS (SEE FIG. 13).
1. Switch operation:
The trigger switch lock-off button is designed to prevent inadvertent operation of the power tool. To operate
the power tool, it is necessary to first fully insert the lock-off button into the hole on the handle as shown in
Fig. 14.
The trigger switch will not operate unless the lock-off button has been pushed in. When the trigger switch is
released, the power goes off and the lock-off button automatically returns to its initial position, locking the
trigger switch.
WARNING: ALWAYS REMOVE THE LOCK-OFF BUTTON FROM THE HANDLE WHEN THE
POWER TOOL IS NOT IN USE. THIS WILL ENSURE THAT THE POWER TOOL
CANNOT BE TURNED ON ACCIDENTALLY OR BY SOMEONE (ESPECIALLY A
CHILD) WHO IS NOT QUALIFIED TO USE THE POWER TOOL. IF THE LOCK-OFF
BUTTON IS LEFT IN THE HANDLE, SERIOUS PERSONAL INJURY CAN RESULT.
SINCE THE LOCK-OFF BUTTON FITS RATHER TIGHTLY, IT MAY BE NECESSARY `
TO TURN IT TO THE LEFT AND RIGHT DURING MOUNTING AND REMOVING.
(Fig. 14)
(Fig. 13)
Operation