Jensen VM9114 - Manual (Page 21)

17
VM9114
Switching to Radio Tuner Source
• Touch the top left corner of the screen to view the SOURCE MENU. Touch
“Radio”.
• Press the SRC button (10) on the front panel or remote control (8) to
switch to the AM/FM or RADIO source.
Selecting FM/AM Band
Touch the BAND button (15) on the screen to change between the following
bands: FM1, FM2, FM3, AM1, and AM2.
NOTE: The BAND button on the unit only works when the TFT is closed.
Seek Tuning
To seek the next higher station, touch the | button on screen.
To seek the next lower station, touch the | button on screen.
Manual Tuning
To increase or decrease the tuning frequency one step, touch the or
buttons on screen.
Direct Tuning
To enter a radio station directly, touch the button to display the direct entry
menu.
Enter the desired radio station using the on-screen number pad. Press the
Enter button to tune to the selected station. To exit the screen without
changing the station, touch Exit. To clear your entry and start over, touch
Clear.
FM: _ _ _ . _ MHz
1 2 3
4 5 6
7 8 9
0 Clear
Exit
Enter