Jensen VM9114 - Manual (Page 9)

5
VM9114
USING THE TFT MONITOR
Open/Close TFT Monitor
Open TFT Monitor
Press the OPEN button (1) on the front panel to activate the mechanism that
moves the display panel into the viewing position.
Close TFT Monitor
Press the OPEN button (1) on the front panel to load the display panel back
into the compartment.
TFT Monitor Auto Open
If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically
moves to the viewing position.
If “TFT Auto Open” is “off” when the unit is turned on, press the OPEN button
(1) to move the monitor into the viewing position.
If “TFT Auto Open” is set to “Manual”, the TFT will not close when the key is
turned off.
Monitor Tilt Angle Adjustment
A known characteristic of TFT panels is the quality of the display in
relationship to the viewing angle. The monitor angle can be adjusted for
optimum viewing using by pressing the TILT button (5) on the unit. While the
blue tilt icon is flashing, turn the rotary encoder to adjust the screen angle.