JVC KD-ADV8490 - Manual (Page 29)

ENGLISH
29 OPERATIONS
Continued on the next page
When a call comes in....
The source is automatically changed to “Bluetooth.”
• Phone number appears (if acquired).
When “Auto Answer” is activated....
The unit answers the incoming calls automatically, see
page 49.
• When “Auto Answer” is deactivated, press any
button (except /control dial) to answer the
incoming call.
• You can adjust the microphone volume level (see
page 49).
To end the call or reject an incoming call
Hold any button (except
/control dial).
• When “Auto Answer” is set to “Reject,” the unit
rejects any incoming calls.
Answering a waiting call
If your cellular phone is equipped with the call waiting
function, you can put the current call on hold and
answer the waiting call.
Press any button (except
/control dial).
• To restore the on-hold call, press any button (except
/control dial) again.
• When you end one call, you can connect to the other.
When a text message comes in....
If the cellular phone is compatible with Text Message
and “MSG Notice” is set to “On” (see page 49), the unit
rings and “Received Message” appears on the display to
inform you of the message arrival.
• You cannot edit or send a message through the unit.
How to enter phone number
How to delete phone number
1
2 Select “Call.”
3 Display the list of phone numbers using one
of the dialing method (see step 3 of “Making
a call” on page 28).
4 Select the name/phone number you want to
delete.
5 Delete the selection.
• Press number button 6 ( ) to delete all
the listed numbers in step 3 .
Select a number.
Move the entry position.
Confirm the entry.
EN26-33_KD-ADV8490[J]_1.indd 29 EN26-33_KD-ADV8490[J]_1.indd 29 3/11/08 10:32:52 AM 3/11/08 10:32:52 AM