JVC KD-ADV8490 - Manual (Page 49)

ENGLISH
49 SETTINGS
Auto Answer
On: The unit answers the incoming calls
automatically.
Off: The unit does not answer the calls
automatically. Answer the calls manually.
Reject: The unit rejects all incoming calls.
MSG Notice (message notice)
On * 1 : The unit informs you of the arrival of
a message by ringing and displaying
“Received Message.”
Off: The unit does not inform you of the arrival of
a message.
MIC (microphone setting)
Adjust the built-in microphone volume,
[Level 01/02/03].
Phonebook
Load the phone book of the Bluetooth phone to the
unit. (You can load up to 50 phone numbers.)
Initialize
Yes: Initialize all settings you have made in the
Bluetooth menu.
No: Return to the previous screen.
Name
Name of the unit (as shown on Bluetooth devices).
Address
Address of the unit.
Version
Hardware and software versions of the Bluetooth
module.
Phone Device * 2
Name of the connected Bluetooth phone.
You can change the settings listed below and on the
right column according to your preference.
• When
is shown on the display, you can move
back to the previous screen by pressing number
button 3.
1
2
Select “Setting.”
3
Select a setting item.
Auto Cnnct
Ô
Auto Answer
Ô
MSG Notice * 1 Ô MIC Ô Phonebook Ô
Initialize Ô Name Ô Address Ô Version
Ô Phone Device * 2 Ô Audio Device * 2 Ô
(back to the beginning)
4
Change the setting accordingly.
• If “PhoneBook” is selected in step 3, see page 30
for details.
* 1 , * 2 refer to page 50.
Setting menu ( : Initial)
Auto Cnnct (auto connect)
When the unit is turned on, the connection is
established automatically with...
Off:
No Bluetooth device.
Last: The last connected Bluetooth device.
Bluetooth settings
Continued on the next page
EN42-49_KD-ADV8490[J]_5.indd 49 EN42-49_KD-ADV8490[J]_5.indd 49 15/4/08 3:35:45 AM 15/4/08 3:35:45 AM