JVC GET0241-001B - Manual (Page 15)

15
ENGLISH
OTHER MAIN FUNCTIONS
Selecting the level meter
—LEVEL
You can select the level meter display according
to your preference.
When shipped from the factory, “AUDIO 2” is
selected.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “LEVEL,” “B. SKIP,”
or “EXT IN” appears on the display.
2
Select “LEVEL” if not shown on the
display.
3
Select the desired mode—
“AUDIO 1,” “AUDIO 2,” or “OFF.”
• AUDIO 1: Shows the audio level indicator.
• AUDIO 2: Alternates “AUDIO 1” setting
and illumination display.
• OFF: Erases the audio level indicator.
4
Finish the setting.
Selecting the external
component to use—EXT IN
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
When shipped from the factory, CD changer is
selected as the external component.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “LEVEL,” “B. SKIP,”
or “EXT IN” appears on the display.
2
Select “EXT IN”* if not shown on the
display.
* Displayed only when one of the following
sources is selected—FM, AM, and TAPE.
3
Select the desired mode—
“CHANGER” or “LINE IN.”
• CHANGER: To use the CD changer.
• LINE IN:
To use the external component
other than CD changer.
4
Finish the setting.
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, see page 21.
LINE IN CHANGER
OFF
AUDIO 1 AUDIO 2
EN15-16KS-FX555[UN]f.p65 5/12/04, 4:59 PM 15