JVC GET0241-001B - Manual (Page 18)

18
ENGLISH
Connecting the CD changer
Before connecting the CD changer
• To prevent short circuits, it is recommended to
disconnect the car battery’s negative terminal
and make all electrical connections before
connecting the CD changer.
• When mounting the unit removed from your
car, be sure to use the screws provided, as
instructed. If other screws are used, there is a
possibility that parts could become loose or
damaged.
• When tightening screws or bolts, be careful not
to pinch any connection cord.
• If you are not sure how to connect the CD
changer correctly, consult your car dealer or
JVC car audio dealer, or have it installed by a
qualified technician. Refer also to the
instructions supplied for the CD changer.
The following illustration shows the connection
to JVC CD changer. If you have another CD
changer, consult your car dealer or JVC car
audio dealer for connections.
1
Remove this receiver from your car.
• Be sure to keep all the screws and parts
removed from your car.
2
Connect this receiver to JVC CD
changer with the connection cord
supplied for the CD changer.
Connection cord supplied for the CD changer
JVC CD changer
3
Re-install this receiver to your car
using the screws removed in step
1.
• For JVC CD changer installation, refer to
the instructions supplied for JVC CD
changer.
Playing discs
Select the CD changer (CD-CH)*.
* If you have not connected a CD changer, or if
you have changed the “EXT IN” setting to
“LINE IN” (see page 15), you cannot select the
CD changer.
• When the current disc is an MP3 disc:
Playback starts from the first folder of the
current disc once file check is completed.
MP3 indicator
Current folder
number
Clock time Current file
number
Selected disc
number
EN17-20KS-FX555[UN]f.p65 5/13/04, 4:38 PM 18