Looking for the scene you want, Activate index search, Activate instant review – JVC HR-J665ES User Manual
Page 17: Advanced operations, Index search, Skip search, Instant review
17
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
Press
@
or
#
(
4 or ¢). “4 1” or “¢ 1” is
displayed on screen and search begins in the corre-
sponding direction.
●
To access index codes 2 through 9, press
@
or
#
repeatedly until the correct index number is dis-
played.
Ex.: To locate the beginning of B from the current
position, press
@
twice.
To locate the beginning of D from the current
position, press
#
once.
●
When the specified index code is located, playback
begins automatically.
Current position
Index number
A
B
C
D
E
F
–2
–1
1
2
3
¢ 2
Looking For
The Scene
You Want
SKIP OVER UNWANTED
SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search, press
PLAY
.
Skip Search
1
2
3
4
5
6
7
8
9
0
2
4
1
3
?
30 SEC
ADVANCED OPERATIONS
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
●
The front display panel tells you how many
programmes have been timer-recorded. If you have,
for example, 3 programmes, “REVIEW” and "3"
appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can
access a programme as far as 9 index codes away
from the current tape position.
NOTES:
●
Instant ReView is not possible while the recorder is in the
Timer mode.
●
The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
(
☞
pg. 22).
REVIEW