JVC HR-J665ES - Manual (Page 24)

24
ENTREE ANT. IN
ENTREE/DECODEUR
IN/DECODER AV2 ENTREE/SORTIE
IN/OUT
SORTIE
RF OUT ANTENNE AV1
SORTIE OUT
R
L
AUDIO
ENTREE ANT. IN
ENTREE/DECODEUR
IN/DECODER AV2 ENTREE/SORTIE
IN/OUT
SORTIE
RF OUT ANTENNE AV1
SORTIE OUT
R
L
AUDIO
1 2 3
4 5 6
7 8 9
0
2
4
1
3
?
ADVANCED OPERATIONS (cont.)
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on the
below.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press AUX and/or
TV PROG to select “L-1” for the AV1 IN/OUT connec-
tor, or “L-2” for the AV2 IN/DECODER connector,
depending on the connector being used.
SET EDIT MODE
3
See "Picture Control" on page 20.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select EDIT to dub tapes in step 3, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
● When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
☞ pg. 26).
Another recorder
RF Cable
(provided)
Another recorder
Recorder
21-pin SCART Cable
(not provided)
Player Your recorder Recorder Your recorder TV Receiver TV Receiver
RF Cable
(provided)
21-pin SCART Cable
(not provided)
Player
VIDEO
CHAN-
NEL or
AV mode
VIDEO
CHAN-
NEL or
AV mode
TV PROG
AUX