JVC XM-228BK - Manual (Page 13)

9
English
To pause the MD:
Press
6 on the main unit or press on the remote control unit.
The indicator lights up.
To cancel pause, press
6 on the main unit or press 3 on the remote control unit. The MD
starts from the position where it has paused.
To select a track ——————————————————
You can select a desired track during playback or in Stop mode. When you use the numeric
keys on the remote control unit in Stop mode, the selected track automatically starts
playing.
Main unit:
During playback, turn the jog dial to the right or left to select the track you want. Then, the
selected track starts playing.
•
Turn the jog dial to the right by one click to skip to the beginning of the next track.
• Turn the jog dial to the left by one click to skip to the beginning of the current track
being played. While “--:--” is shown on the display, you can play the previous track by
turning the jog dial to the left.
In Stop mode, you can select a track in the same way. To start playback, press 6.
Remote control unit:
Using
4 or ¢ :
During playback, press
4 or ¢ to select the track you want. Then, the selected
track starts playing.
•
Press
¢ once to skip to the beginning of the next track.
• Press
4 once to skip to the beginning of the current track being played. While
“--:--” is shown on the display, you can play the previous track by pressing 4.
In Stop mode, you can select a track in the same way. To start playback, press
3.
Using the numeric keys:
During playback or in Stop mode, select a track with the numeric keys. Then, the
selected track starts playing.
Selecting a track with the numeric keys:
To select track No. 5 : Press 5.
To select track No. 15: Press +10 then 5.
To select track No. 20: Press +10 then 10.
To select track No. 52: Press +10 five times then press 2.
• When you try to select a track number greater than the recorded tracks in the MD,
the last track is automatically selected.
Search play —————————————————————
During playback, you can fast forward/backwards the MD to quickly find a particular
passage in the track you are listening to.
To perform this, press and hold
1 or ¡ on the main unit or the remote control unit.
Using headphones —————————————————
Connect a pair of headphones (not supplied) to the PHONES jack to listen to the playback
sound of the MD or rec-monitor sound.
• The output from the unit is not cut off even if the headphones are used.
Caution
• Be sure to turn down the PHONES LEVEL control before
connecting or putting on headphones.
1 2 3 4
5 6 7 8
9 10 +10
or
or
XM-228BK(E)-Eng. p.1-16 98.9.24, 9:57 AM 9