JVC D-ILA DLA-RS60 - Manual (Page 19)

19
Getting Started
ENGLISH
Controls and features (continued)
■
Remote Control
How to insert batteries into the remote control
● If the remote control has to be brought closer to the projector to operate, it means that the batteries are
wearing out.
When this happens, replace the batteries. Insert the batteries according to the marks.
● Be sure to insert the end first.
● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the
batteries again and operate the remote control.
① ② ③
To turn on the power
To select input mode
(Reference page: 32)
To illuminate buttons on the remote
control for 7 second
To select or confirm
To return to the previous menu
(Reference page: 43)
To switch picture mode
Color Profile
Sequentially switched picture
adjust items, such as contrast and
brightness.The switching items are
not the same for different models, or
different picture modes.
To set gamma
To adjust color temperature
To display/close the menu
(Reference page: 43)
To hide the image
temporarily(Reference
page: 36)
Lens Aperture
To control lens
(Reference page: 32)
To turn off the power
Clear Motion Drive
BACK
HIDE LIGHT
LENS AP. C.M.D
PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.
CONTROL
MENU
GAMMA P.FILE
COLOR
ADJ.
PIC.
ON
FILM
NATURAL STAGE 3D
USER1 USER2 THX
ANIME CINEMA
PICTURE MODE
INPUT
TEMP
COLOR
To set the screen size
(Reference page: 34)
Anamorphic
Button: displays information
INFO.
USER3
Button
Color space button
SPACE
COLOR
RS50 RS50 RS60
RS50 RS50 RS40
RS50 RS50 RS40
RS50 RS50 RS40