JVC TK-C2201WPE - Manual (Page 15)

m
Connecting the cable
For safety reasons, turn on the power only after all the connection is complete.
The status indicator lights up when the camera is turned on.
1 Connect the coaxial cable (A page 10)
Lower the protection cover and connect the connectors.
Upon connecting, restore the protection cover to cover the connectors. This will
isolate and protect the metallic parts of the connectors.
2 Connect the power supply cable (A page 11)
3 Wrap insulation tapes around the connecting parts of the power
supply cables
Memo Wrapping insulation tapes will improve future work conditions, as well as
reduce penetration by noise and other objects.
4 Wrap the insulation tape
5 Push the connector of the connected coaxial cable back to the
ceiling.
.
.
1
2
4
3
Protection
cover
Coaxial
cable
Insulating tape
Solder or caulk
Power supply cable
Bind insulating tape
Installation
15