JVC TK-C2201WPE - Manual (Page 19)

Mounting the Camera Using the Conduit Hole at the Bottom of the
Base
Conduit hole: G3/4-14 UNC (TK-C2201WPU), M25 (TK-C2201WPE)
1 Remove the dome cover and inner dome (A page 13)
2 Remove the camera unit from the base and mount the fall
prevention wire to the camera unit
① Loosen the camera unit fastening screw (2 locations) with a screwdriver.
② Press the catch (2 locations) inwards and remove the camera from the base.
③ Remove the fall prevention wire fastening screw on the base to mount the fall
prevention wire. (The fall prevention wire is not provided.)
.
1
RELEASE
2
2
1
2
1
Base
Camera unit
Catches (x 2)
Installation
19