JVC KS-FX450R - Manual (Page 14)

14
ENGLISH
Other convenient RDS functions and adjustments
Changing the display mode while listening to an FM
station
You can change the initial indication on the display to station name (PS NAME), station
frequency (FREQ), or clock time (CLOCK) while listening to an FM RDS station.
• See also “Changing the general settings” on page 22.
1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode.
2. Press or to select “DISPMODE (display mode).”
3. Press + or – to set to the desired indication — PS NAME (station name), FREQ (station
frequency), or CLOCK (clock time).
Note:
By pressing DISP, you can also change the display while listening to an FM RDS station.
Each time you press the button, the following information appears on the display:
* Then, the display goes back to the original indication in several seconds.
Setting the TA volume level
You can preset the volume level for TA Standby Reception. When a traffic programme is
received, the volume level automatically changes to the preset level.
• See also “Changing the general settings” on page 22.
1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode.
2. Press
or to select “TA VOL (volume).”
3. Press + or – to the desired volume.
PS NAME (Station name)
PTY (Programme type)
FREQ (Station frequency)
CLOCK (Clock time)
EN08-15.KS-FX453/450/353/350[E] 99.11.9, 3:32 PM 14