JVC KS-FX450R - Manual (Page 4)

4
ENGLISH
RADIO BASIC OPERATIONS
Listening to the radio
2
AM
FM
FM1 FM2
FM3
AM
1
Note on One-Touch Operation:
When you select a band in step 2 below, the power automatically comes on. You
do not have to press this button to turn on the power.
2
1
3
Turn on the power.
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3
to listen to an FM station.
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be sure to eject the cassette
from the cassette compartment to listen to the radio.
3
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Select the band (FM or AM).
Press FM or AM.
2 Press and hold or until “M” starts flashing on the display.
Now you can manually change the frequency while “M” is flashing.
3 Press or repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM — MW/LW) until you release the button.
Start searching a station.
When a station is received, searching stops.
KS-FX453R
KS-FX450R
SSM SSM
KS-F353R
KS-F350R
or
To search stations of lower frequencies.
To search stations of higher frequencies.
/ I /ATT
EN04-07KS-FX453/450/353/350[E] 99.11.9, 3:31 PM 4