JVC DLA-HD1 - Manual (Page 24)

24
3 Basic Operation
Projecting Image
Preparation
z Remove the lens cap.
A
Insert the power plug to the power outlet
B
Turn on the power
C
Project the image
a Select input mode
b Play back the selected device
D
Adjust the position of the projection screen
This section describes the basic operations to project input images on the screen.
z You can also press the [STANDBY/ON] button on the unit to turn on the
power. (p
P15)
z You can also select the input mode by pressing the [INPUT] button on
the unit. (p
P15)
z
See AInstalling the Projector and ScreenB for procedures on adjusting the
position. (p P22)
Light on (Red) Power Cord
(Supplied)
A Connect to this unit
B Connect to the power outlet
Light on (Green)
DLA-HD1D_EN.book Page 24 Tuesday, January 30, 2007 2:54 PM