Johnson Controls AS-CVTPROx00-1 - Manual (Page 6)

6 AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter Installation Instructions
Technical Specifications
Product AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter
AS-CVTPRO100-1 with 120VAC/3VDC External Power Adapter (North American version)
AS-CVTPRO200-1 without power adapter (European version)
Power Requirements Zone Bus: Controller Supplied Power: Stand-alone or via Thermostat - 24 VAC or
VMA applications - 15 VDC
N2 Bus: External Power Adapter: 120 VAC to +3 VDC 200 mA Class 2 Transformer
(Included with CVTPRO Converter in North America only) or
Battery Power: Two type AAA Alkaline, not included, see Table 5.
Agency Listings FCC Part 15 Subpart B, Class A
CE Mark:
EN50081-2 (Electromagnetic Compatibility, EN55011, Class A)
EN50082-2 (Electromagnetic Compatibility, EN61000-3-2 and EN61000-3-3)
Ambient Operating
Conditions
0 to 50 ° C (32 to 122 ° F) 20-80% RH (Relative Humidity)
30 ° C (86 ° F) Maximum Dew Point
Ambient Storage
Conditions
-40 to +60 ° C (-40 to 140 ° F) 5-95% RH
30 ° C (86 ° F) Maximum Dew Point
Shipping Weight 0.227 kg (0.5 lb.)
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Refer to the Auxiliary Gear Technical Bulletin (LIT-6363080) for necessary information on ordering, operation, and performance specifications
of this product.
Controls Group
507 E. Michigan Street
P.O. Box 423
Published in U.S.A.
Milwaukee, WI 53201 www.johnsoncontrols.com