JVC HR-DD845EK - Manual (Page 44)

44
1 2
4 5
3
6
8
0
7 9
2
4
1
3
PUSH JOG
Perform steps 1 and 2 of "Storing Channels Manually" on
page 42 to access the Confirmation screen before continuing.
SELECT ITEM
1
Press PUSH JOG %fi until the item you want begins
blinking. Then press OK twice and the station’s name
(ID) begins blinking.
SELECT NEW STATION
2
Press PUSH JOG %fi until the new station’s name (ID)
you want to store begins blinking.
Registered station names (
੬
pg. 46) appear as you
press PUSH JOG %fi.
SWITCH STATIONS
3
Press OK.
● Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION
SCREEN
4
Press MENU.
%
%
Set Stations (A)
OK
MENU
TUNER SET (cont.)
NOTE:
First perform step 1 of the above procedure.
%
SELECT STATION NAME
CHARACTER
2
Press PUSH JOG and the first letter of the station
name begins blinking.
ENTER NEW CHARACTER
3
Press PUSH JOG
%fi to cycle through the characters
(A–Z, 0–9, –, * , +, (space) ) and stop when the
desired one is indicated, then press PUSH JOG to
enter. Enter the remaining characters the same way
(maximum of 4).
After entering all characters, press OK.
● Repeat steps 1 through 3 as necessary.
● If you make a mistake, press PUSH JOG until the
incorrect character begins blinking. Then enter the
correct character by pressing PUSH JOG
%fi.
CLOSE CONFIRMATION
SCREEN
4
Press MENU.
[ %
%
Set Stations (B)