JVC HR-DD845EK - Manual (Page 57)

57
( ADD TIME Button adds time to end of Video
Plus+ timer recording (5 minutes each time
button is pressed.)
੬ pg. 25
) DAILY Button enables timer recording of daily
serials. ੬ pg. 25, 27
q WEEKLY Button enables timer recording of
weekly serials.
੬ pg. 25, 27
w AUX Button selects recorder's auxiliary input
mode. ੬ pg. 30
e TIMER Button — same as button on recorder.
੬ pg. 25, 27
r TV PROG +/– Button — same as button on
recorder. ੬ pg. 20
t DATE +/– Button inputs date of program for
timer recording.
੬ pg. 26
y TV/SAT/VCR Switch enables remote control of
VCR or connected TV or satellite receiver.
੬ pg. 38, 39
u TV/VCR Button switches connected TV's mode
between TV and AV.
੬ pg. 38
i Fast Forward Button fast-forwards tape
੬ pg. 12;
initiates high-speed forward search. ੬ pg. 13
o Pause Button — same as button on recorder.
੬ pg. 13
p Stop Button — same as button on recorder.
੬ pg. 12
Q PROG CHECK Button accesses Program
screens/displays to check the program that you
have programmed (next program's information
screen/display appears each time button is
pressed).
੬ pg. 28
W OK Button enters selections made in on-screen
menus.
੬ pg. 10
E TV VOL
%fi Button controls volume of con-
nected TV. ੬ pg. 38
Installing Batteries
1 Open the battery compartment cover.
2 Insert 2 "AA"-size batteries (provided) in the correct
directions.
3 Replace the cover.
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands.
੬
pg. 38, 39.
● Point the remote control toward the sensor window.
● The maximum operating distance of the remote control
is about 8 m.
NOTE:
If for some reason the remote control doesn't work properly,
remove its batteries, wait a short time and then try again.