John Lewis JLBICH605 - Manual (Page 9)

Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the
appliance with steam blasters or high-
pressure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the
appliance operates.
Removing the dirt:
1. – Remove immediately: melting
plastic, plastic foil, and food containing
sugar. Use a special glass ceramic
scraper. Put the scraper on the glass
ceramic surface at an acute angle and
slide the blade on the surface.
– Stop the appliance and let it cool
down before you clean: limescale rings,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaner for
glass ceramic or stainless steel.
2. Clean the appliance with a damp cloth and
some detergent.
3. At the end rub the appliance dry with
a clean cloth.
What to do if...
Problem Possible cause and remedy
You cannot start the appliance or
operate it. • You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
• The child safety device operates . Stop the function. See the
section “Child safety device”.
• Start the appliance again and set the heat setting in 10 seconds.
The residual heat indicator does
not come on. The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound
operates. You covered . Uncover the sensor field.
comes on. • The automatic switch-off operates. Stop the appliance and start
it again.
Overheating protection for the cooking zone operates. Stop the
cooking zone and start it again.
9