GE 20626 GE Universal Remote - Manual (Page 6)

6
Battery Installation
1.. On.the.back.of.the.remote,.push.down.on.the.tab.and.lift.the.
cover.off.
2.. Match.the.batteries.to.the.+.and.-.marks.inside.the.battery.
case,.then.insert.2.AAA.alkaline.batteries.
3.. Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.are.depressed.
more.than.30.seconds..This.will.save.your.batteries.should.your.
remote.get.stuck.in.a.place.where.the.buttons.remain.depressed.
(e.g.,.between.the.sofa.cushions).
Code Saver
You.will.have.up.to.10.minutes.to.change.the.batteries.in.your.
remote.without.losing.codes.you.have.programmed..However,.do.
not.press.any.buttons.until.batteries.are.installed.in.the.remote..If.
buttons.are.pressed.without.batteries.in.the.remote,.all.codes.will.
be.lost..
Power-On Default
The.remote.powers.on.in.TV.mode.
Code Setup
The. SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.
the.remote.using.the.code.for.your.brand.of.product,.from.the.code.
tables.(on.separate.sheet),.or.you.can.search.through.the.library.of.
codes.until.you.find.a.code.that.works.for.your.product.
Please.refer.to.“Programming.with.Code.Search”.on.page.8.for.
more.information.on.using.the.code.search.feature.to.learn.how.to.
search.through.the.library.of.codes.for.your.products.
NOTE:.You.can.store.any.kind.of.code.under.any.mode.(except.TV)..
I.E..you.can.store.a.VCR.code.under.the.
CBL button,.or.a.SAT.code.
under.the. DVD button,.etc..However,.you.can.only.store.TV.codes.
under.the. TV button.
Setup