GE 20626 GE Universal Remote - Manual (Page 7)

7
Direct Code Entry
1.... Press.and.hold.the. SETUP.button.until.the.red.indicator.stays.
on,.then.release.the SETUP.button.
2.... Press.and.release.the.desired.mode.button.( TV, DVD,.etc.)..The.
red.indicator.blinks,.then.stays.lit...
3.. Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..
Note:.after.a.valid.code.entry,.the.red.indicator.turns.off...For.
an.invalid.code,.the.red.indicator.flashes.
4.. With.your.device.on,.press CHANNEL UP..If.the.device.
responds,.no.further.programming.is.required..Note:.If.some.
buttons.do.not.operate.your.equipment,.try.one.of.the.other.
codes.for.your.brand.
Write.your.codes.down.here.for.easy.reference.later.
Device. .................................Device.stored......... .........Code
TV. ..................................................TV
DVD. .
CBL/SAT
DVR/AUX