Power tape transport playback, Troubleshooting – JVC HR-J480EU EN User Manual

Page 47

Advertising
background image

Filename [HRJ480EU3.fm]

Masterpage:Right

EN

47

TROUBLESHOOTING

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are
often easily corrected, and this can save you the trouble of sending your video recorder off for repair.

POWER

TAPE TRANSPORT

PLAYBACK

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. No power is supplied to the recorder.

● The mains power cord is disconnected.

Connect the mains power cord.

2. The clock is functioning properly, but

the recorder cannot be powered.

● “

#

” is displayed on the front display

panel with Auto Timer set to “OFF”.

Press the

#

button to turn the “

#

indicator off.

3. The remote control won’t function.

● The batteries are discharged.

Replace the dead batteries with new ones.

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. During recording, the tape does not

run. “

” lights up and the channel

display blinks on the front display
panel.

● The recorder is in the Record Pause

mode.

Press

4

to resume recording.

2. The tape will not rewind or

fast-forward.

● The tape is already fully rewound or

fast-forwarded.

Check the cassette.

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. The playback picture does not appear

while the tape is running.

● If you’re using the RF connection,

. . . the TV receiver’s channel selector is
not set to the video channel.
. . . the recorder’s video channel has not
been correctly set.

If you are using the RF connection,
. . . set the TV receiver to the video
channel.
. . . perform “Video Channel Set”
(

pg. 46).

● If you’re using the AV connection, the

TV receiver is not set to the AV mode.

If you are using the AV connection, set the
TV to its AV mode.

2. Noise appears during visual search.

● This is normal.

3. Noise appears during normal

playback.

● The automatic tracking mode is

engaged.

Try manual tracking. (

pg. 16)

4. The playback picture is blurred or

interrupted while TV broadcasts are
clear or “USE CLEANING CASSETTE”
message appears on the screen.

● The video heads may be dirty.

Use a dry cleaning cassette TCL-2UX or
consult your JVC dealer.

HRJ480EU3.fm Page 47 Friday, January 12, 2001 10:51 AM

Advertising