JVC VN-V686U - Manual (Page 39)

39
Memo :
● To use the built-in MPEG4 Viewer of VN-V686U, install “ffdshow” that is open source codec. You can
download “ffdshow” from the Internet.
Exiting the MPEG4 Viewer
To exit, press the [X] button at the top right of the window.
● During the next startup of the built-in viewer, launch the Internet Explorer and enter the URL of the
built-in viewer in the address field.
For example, if the IP address of VN-V686U is 192.168.0.2, enter as follows:
http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_m.html
● After the [Security Settings] screen appears, press the [OK] button to proceed.
D Setup Displays the built-in viewer settings window.
This setting screen is used to set the built-in viewer as a software on the
computer.
Note:
● Settings on this setting screen do not affect settings of the VN-V686U
unit.
Click [X].
VN-V686WPU_EN.book Page 39 Wednesday, January 16, 2008 10:39 AM