JVC AV 65WP84 - Manual (Page 21)

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
è To choose MANUAL
† To TIME
è To set the hour
† To minute
è To set the minute
† To Start Clock
Manual Clock Set
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Quick Setup Plug-In Menu
21
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you
do not have this in your area, you will have to set the clock manually. See manual clock set
below. To set the clock using the XDS signal:
è To choose AUTO
† To TIME ZONE
è To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
†
To move to D.S.T. (Daylight Savings Time)
è To turn D.S.T. ON or OFF
† To NEXT (To Auto Tuner Setup)
Notes:
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight
Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The
clock will move back one hour at 2:00 am on the last Sunday in October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Auto Clock Set
(To be continued...)
MODE
TIME
MANUAL
-- : -- --
SET CLOCK
START CLOCK
SELECT OPERATE EXIT MENU
MODE
TIME ZONE
D.S.T.
AUTO
ATLANTIC
OFF
SET CLOCK
NEXT
SELECT OPERATE EXIT MENU
AV-56\65WP84 English 21 7/11/03, 9:32:41 AM