JVC GR-DX300 EN - Manual (Page 44)

E N
44 SYSTEM CONNECTIONS
“ACCESSING FILES” appears on the LCD monitor
while the PC is accessing data in the camcorder or the
camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.
To DV
)
To USB
connector
DV cable
(optional)
To DV
connector
USB cable
(provided)
To USB
(
PC with DV connector PC
Core filter
OR
Core filter
[A] Using USB cable [B] Using DV cable
Connection To A Personal Computer
[A] Using USB cable
It is possible to do the following things:
● Transfer still/moving images stored on a memory card to
a PC.
● Transfer still/moving images recorded on a tape to a PC.
● Capture still/moving images in real-time.
● Use this camcorder as a WebCam.
[B] Using DV cable
It is also possible to transfer still/moving images to a
PC with a DV connector by using the provided
software, software equipped with the PC or
commercially available software.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE” for the installation of the bundled
software and drivers.
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
੬
pg. 7).
● Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder.
● If the PC connected to the camcorder via the USB cable
is not powered, the camcorder does not enter the USB
mode.
● The date/time information cannot be captured into the
PC.
● Use the provided software PIXELA ImageMixer to
capture video in real-time.
● You can also use the camcorder for webconference by
using Windows ® Microsoft Netmeeting and signing up for
Microsoft Hotmail.
● Refer to the instruction manuals of the PC and Software.
● The still images can also be transferred to a PC with a DV
connector-equipped capture board.
● When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depend-
ing on the type of DV connector (4 or 6 pins) on the
PC.
● The system may not work properly depending on the PC
or capture board you are using.
● When using the DV connection refer to manufacturer
instructions of your capture board for driver’s installation
and operation instructions.
* When connecting cables, open this cover.
Connector cover*