GE 99004 GE Bluetooth Home Stereo Transmitter and Receiver - Manual (Page 4)

4
Pairing the GE 99004 to a Bluetooth ®
Enabled Device
Receiving Mode:
1. Make sure the transmitting device (a laptop computer or
other audio device transmitting via Bluetooth
® ) is turned
on and in transmission mode. See the owner’s manual of
the other device for any product specifi c instructions.
2. Turn on the Audio/Video receiver and select the
appropriate
input.
3. Set the GE 99004’s Receive/Transmit switch to Receive
and turn it ON. When powered on, the 99004 will search
for a Bluetooth
® transmitter and if it has already been
paired with the transmitter, automatically connect. If
the devices have not been paired previously, press the
front panel “pairing” button (with Bluetooth
® logo) to pair
the devices and link them. The GE 99004’s Pairing LED will
fl ash quickly during this process and stay ON when
pairing is complete. When unlinked, the LED will blink
slowly.
Note: When in “Receive” mode, the LED is red.
4. Play music from the source–computer, or stand-alone
transmitter. The audio should stream to the receiver so
that you can hear it through your stereo system.
Transmitting Mode:
1. Make sure the receiving device is turned on. Most
Bluetooth
® enabled headphones will automatically pair
with the GE 99004. See the owner’s manual of the other
device for any product specifi c instructions.
2. Turn on the Audio/Video receiver and select the
appropriate input (CD, FM, etc.) for the music source.