Jwin JB TH220 - Manual (Page 13)

Headset w/ Bluetooth technology V10M10_IM_EN_08032007
www.jWIN.com - 12 -
GETTING STARTED
Pairing the headset with mobile phones
using Bluetooth wireless technology
1. With the power turned off, press and hold the Multi-function
button for approximately 3 to 5 seconds. Blue and Red lights
will blink alternatively.
2. Set both the JB-TH220 and the mobile phone to SEARCH
mode following the pairing instructions included with the
phone
, placing both units close together. Typically mobile
phones have a Bluetooth menu from which SEARCH can be
selected.
3. The mobile phone with Bluetooth wireless
technology will identify the Headset.
4. Confirm with “yes,” or “ok.”
5. When asked for a passkey
or PIN, enter 0000 (4
zeros) and press “yes,” or “ok.”
6. Phone and headset have successfully paired.