Jwin JB TH220 - Manual (Page 16)

Headset w/ Bluetooth technology V10M10_IM_EN_08032007
www.jWIN.com - 15 -
OPERATING INSTRUCTIONS
Answering a Call
Be certain the headset is properly paired with a mobile phone
featuring Bluetooth wireless technology before answering a call.
1. An incoming phone call will be indicated by a ring. Press the
Multi-function button once to answer the call.
2. If the headset is off when there is an incoming call, press the
Multi-function button to turn on the headset and answer the
call as usual.
Notes on Answering a Call
• When there is an incoming call, some phones might not ring
when paired with JB-TH220, but there will be a beeping
sound from the headset. Press the Multi-function button to
answer the phone when you hear this beep.
• Similarly, some phones may not send an incoming call signal
to the headset. Press the Multi-function button when the
phone rings.
Ending a Call
There are several ways to end a phone call.
1. Press the Multi-function button on the headset.
2. Press the End key on the mobile phone.
3. A call will also end as the person on the other end hangs up.
Note: Your mobile phone with Bluetooth wireless technology
must be paired with the JB-TH220 BEFORE these functions are
attempted.