GE 98903 GE 2.1 Speaker System - Manual (Page 3)

3
5. Installation
Read and follow all instructions carefully. Shut down your
computer and turn off power to speakers before installation.
Failure to do so could result in injury or equipment damage.
Ø
Connect the satellite speaker cables to the appropriate satellite
speaker connectors on the back of the subwoofer. Make sure to
connect the right speaker to the red right (“R”) jack and the left
speaker to the white left (“L”) jack for accurate stereo sound.
Ø
Connect your speakers to your…
Computer
Plug one end of the 3.5mm stereo cable into the “Line In” input
jack on the back of the subwoofer. Plug the other end of the 3.5mm
stereo cable into the output jack on your computer sound card.
(The cable end is color coded to match the green color of the
output jack on most sound cards.)
Portable Audio Device
Plug one end of the 3.5mm stereo cable into the “Line In” input
jack on the back of the subwoofer. Plug the other end of the 3.5mm
stereo cable into the headset jack on your audio device.
DVD Player, TV, etc
You will need a 3.5mm plug to dual RCA plug converter cable.
Plug the 3.5mm plug of the converter cable into the “Line In” input
jack on the back of the subwoofer. Then plug the dual RCA plug of
the converter cable into the dual RCA audio output jack on your
DVD player, TV, etc.
This cable (model 97691) can be purchased on our website:
http://www.jascoproducts.com/