Jet Tools BD-920W - Manual (Page 2)

jettools.com
9" x 20" Belt Drive Bench lathe
• Spindle supported by precision tapered roller bearings
• Hardened and ground bedways
• Power longitudinal feed allows threading and reverse threading
• Enclosed gearbox
• Standard 1-1/2 X 8 TPI spindle mount allows for many aftermarket accessories
• Reversing switch included for added versatility
• Backlash adjustments provided throughout the carriage
• Tailstock is adjustable for taper cuts
• Quick change gearbox provides wide range of inch and metric threads
STandaRd EQuIPMEnT
•
4" 3 jaw chuck with threaded back plate
• 7" 4 jaw chuck with threaded back plate
• Face plate
• Four way tool post
• Single tool post
• Steady and follow rest
• Metric Change gears
• Centers
• Threading dial
• Tool box and tools
9" x 20" Belt Drive Bench lathe
Optional
Stand
StOcK nUMBer 321376
Model Number BD-920W
Motor 3/4 HP, 1 Ph, 115V only
Swing over bed (in) 8-3/4
Swing over cross slide (in) 5-1/2
Distance between centers (in) 20
Spindle bore (in) 25/32
Spindle mount (in X TPI) 1-1/2 X 8
Spindle Taper MT-3
Spindle speeds 6
Spindle speed range (RPM) 130 – 2000
Longitudinal feeds 27
Longitudinal feed range (in/rev) .005 - .011
Inch threads 27
Inch thread range (TPI) 8 – 56
Net weight (lbs) 235
Enclosed
Quick
Change
Gear Box
3 Jaw
Chuck
adustable
Tailstock 4 Way
Tool
Post
Hardened
and Ground
Bedways
Follow
Rest
Steady
Rest