JVC KW-ADV790 - Manual (Page 36)

36
ENGLISH
For SIRIUS Radio
Activate your subscription after connection:
1 Turn on the power.
2 Select “SAT” for the source.
•
☞ also page 9.
The SIRIUS Satellite radio starts updating all the
SIRIUS channels. (
☞ “GCI update” column below.)
• Once completed, SIRIUS Satellite radio tunes in
to the preset channel, CH184.
3 Check your SIRIUS ID, see page 51.
4 Contact SIRIUS on the internet at <http://
activate.siriusradio.com/> to activate your
subscription, or you can call SIRIUS toll-free
at 1-888-539-SIRIUS (7474).
“Subscription Updated Press Any Key to Continue”
appears on the monitor once subscription has been
completed.
For XM Radio
Activate your subscription after connection:
• Only Channel 0, 1, and 247 are available before
activation.
1 Turn on the power.
2 Select “SAT” for the source.
•
☞ also page 9.
The XMDirect TM Universal Tuner Box starts
updating all the XM channels. “Channel 1” is tuned
in automatically. (
☞ “GCI update” column below.)
3 Check your XM Satellite radio ID labelled on
the casing of the XMDirect TM Universal Tuner
Box, or tune in to “Channel 0” (see page 37).
4 Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call 1-
800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
• JVC SIRIUS Satellite radio interface, KS-SRA 100, for listening to SIRIUS Satellite radio.
• JVC Smart Digital Adaptor, XMDJVC 100, for listening to XM Satellite radio.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS: “Channel is Updating XX% completed” appears.
For XM : “UPDATING” appears.
• Updating takes a few minutes to complete.
• Do not press any buttons or perform any operations until updating is completed.
EN_KW-AVX710[J].indb 36 EN_KW-AVX710[J].indb 36 07.12.5 11:59:17 AM 07.12.5 11:59:17 AM