Jet Tools JWBS-14OCS - Manual (Page 8)

8
Unpacking – JWBS-14CS
Open both shipping containers and check for shipping damage. Report any damage immediately to your
distributor and shipping agent. Read the instruction manual thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
Container One:
1 Closed stand with motor
1 Pulley
cover
1 V-belt
Container Two:
1 Saw
body
1 Table
2 Table lock knobs
1 Table
pin
1 Trunnion support bracket
1 Fastener package (see below)
1 Instruction
Manual
1 Warranty Card
Fasteners
A. Saw Body to Stand
4 – M8x40 hex cap screws
(approx. 1-1/2" long)
8 – M8 flat washers
4 – M8 lock washers
4 – M8 hex nuts
B. Strain Relief Plate to Stand
2 – M5x12 pan head machine screws
C. Pulley Cover to Base
2 – Knobs
D. Trunnion Support Bracket to Saw Body
2 – M8x30 hex cap screws
(approx. 1-1/4" long)
2 – M8 lock washers
1 – M8x80 hex cap screw (for table stop -
approx. 3-1/8” long)
1 – M8 hex nut (for table stop)